Monel Alloy 400 Bolts Suppliers and Manufacturer

Nickel Alloy 400 Bolts

NIckel alloy bolts are made out of nickel alloy based metals where in nickel content is high or very high comparing to other elements which ranges from 50 percentage to 90 percentage of total weight. Nickel alloy 400 is a kind of couper nickel alloy where nickel content is more then 50 percentage of total weight and it makes this alloy super alloy or high nickel alloy.

Alloy 400 bolts are also called as monel 400 bolts in general because of the branding of Monel 400 by an European company. Peoples knows this metal as monel 400 bolts.

Types of Alloy 400 Bolts

Alloy 400 hex bolts
Alloy 400 heavy hex bolts
Alloy 400 socket head bolts
Alloy 400 Square bolts
Alloy 400 allen head bolts
Alloy 400 screws
Alloy 400 hex screws
Alloy 400 half threaded bolts
Alloy 400 full threaded bolts
Alloy 400 U Bolts

alloy_400_bolts

Size Range of Alloy 400 Bolts we manufacture and Supply

We manufacture and supply these bolts from 1/4" or M6 to 4" or M100 Size and up to 10 feet Long.

Chemical Composition of Alloy Bolts

Elements	Minimum	Maximum
Ni	63.00	---
Fe	1.00	2.50
Cr	---	---
Co	---	1.00
Al	---	0.50
C	---	0.30
Si	---	0.50
Mn	---	1.25
P	---	0.02
S	---	0.02
Cu	28.00	34.00
Ti	---	0.30

Quality Assurance for Nickel Alloy Bolts

There are certain inspection check points where bolts have to be inspected to make ensure the best quality as per standard norms..

Dimensions of Monel Alloy 400.
Threaded portion of Monel Alloy 400 Bolts as per ordered specification or standard mentioned in Purchase order.
Threaded as per Go Not Go condition.
Head size and shape which is very most important part in all fasteners.

nickel alloy bolts with third party inspection certifications

Process to Manufacture Alloy 400 Bolts

We have three process to manufacture quality Nickel alloy Bolts. First one is being manufactured by cold work where wire is the input. This process is also known as cold headed or cold forming nickel alloy Bolts. But in this process it is very expensive as we as difficult. because many of the nickel alloy are too hard in character or the required quantity is not economic to manufacture through this cold working process. Not only this alloys are very very high in hardness it consumes lots tooling. Second is to manufacture by just machining from shaped bars like Hexagonal, square or even round depending on what to manufacture.

For example to manufacture Nickel Alloy Hex Bolts we need hexagonal bars but at the same time to manufacture Heavy Hex Head Nickel Alloy Bolt we need bit bigger size hex and to manufacture Nickel Alloy Socket Head Bolts or Allen Head Bolts we may use round bars close to it's head diameter. But here also the cost factor is crucial .

Last but not least is hot work forging. Nickel alloy Nuts are being manufactured with this process when the size is more bigger than normal or the quantity is bit less. There are many advantages to adopt this process of manufacturing Nickel Alloy nuts but there are disadvantages also.

Applications of Alloy 400 Bolts

Nickel alloy Bolts are specific in nature and that is why the application of these bolts are critical or even super critical some times. Normally these kind of alloyed Bolts are required at very high temperature or highly corrosive applications.

Nickel alloy bolts are frequently required in Oil And Gas Industries, Chemical and heavy Chemical Industries, Cement Industries, Offshore Industries etc.

Other nickel alloy metal products we deal into :

Nickel Alloy 400 Bolts Supplier